• DEFENDER
MANUAL DEL USUARIO
— Carburetor
— Head lock and ignition switch
— Meters
(1) After pre-wiping, the vehicle should be washed with clean water to remove dirty residues so as to prevent corrosion. Plastic subassemblies
should be cleaned by wiping with cloth or foam soaked in neutral detergent solution, followed by washing with clean water.
(2) After the cleaned vehicle is air dried, grease the chain and run the engine at idling speed for a few minutes.
(3) Prior to driving, carefully check the braking system repeatedly and repair or adjust it if necessary.
[Greasing procedures to the driving chain]
1.Shut off the engine.
2.Add some machine oil or chain grease to the driving chain.
Attention:
When the rear wheel axil has mored to the back adjusting limit, if excess loose be cause of wea to the driving chain, please change with a new
one.
Rear wheel axle nut
Rear wheel axle
35