Hot Surfaces; Safety Rules - Ariens Zoom 2250 Manual Del Usuario

NEVER CARRY CHILDREN.
OL4480
DO NOT operate on slopes over 17˚.
Go up and down slopes, not across.
17°
MAX
OL4450
• If machine stops going uphill, stop blade and back
down slowly.
• Avoid sudden turns.
• Keep safety devices (guards, shields, switches, etc.)
in place and working.
• Check interlock system per manual before use.
• Understand location and function of all controls.
• Never allow operation by untrained persons.
2. DANGER! ROTATING PARTS
Always keep feet and hands away from
rotating parts.
OL3030
Always stand clear of discharge area. Do not
direct discharge toward other people.
OL0910
Keep people away from unit while operating.
OL3292
Shut off engine, remove key, read manual
before you adjust or repair unit.
OL4010
NO STEP! Always keep feet away from
rotating parts.
OL4420
3. WARNING! Do not operate mower unless guards are
in operating position or bagger is attached.
Always stand clear of discharge area.
OL4430
Do not operate mower unless bagger is
attached or guards are in operating position.
OL3320

4. HOT SURFACES!

DO NOT touch parts which are hot from
operation. ALWAYS Allow parts to cool.
OD0061
5. DANGER!
AVOID INJURY. Stay clear of rotating parts.
OL4730

SAFETY RULES

Operation
Read, understand, and follow all instructions in the
manual and on the machine before starting:
• How to operate all controls
• The functions of all controls
• How to stop in an emergency
• Braking and steering characteristics
• Turning radius and clearances
• Speed ranges
ALWAYS keep protective structures, guards, and panels
in good repair, in place and securely fastened.
Complete a walk-around inspection of the unit and work
area.
Before starting engine: disengage PTO and set parking
brake.
Start and operate unit only when seated in operator's
position. Steering control levers must be in neutral, PTO
disengaged and parking brake set when starting engine.
ALWAYS disengage PTO, stop unit and engine, remove
key, engage parking brake and allow moving parts to stop
before leaving operator's position.
ALWAYS remove key to prevent unauthorized use.
Check for weak spots on dock, ramps or floors. Avoid
uneven work areas and rough terrain.
Dust, smoke, fog, etc. can reduce vision and cause an
accident. Mow only in daylight or good artificial light.
Watch for traffic when operating near or crossing
roadways.
Only allow responsible adults who are trained and
familiar with the instructions to operate the machine.
Training includes actual operation.
Clear the area of objects such as tree branches, rocks,
toys, wire, etc., which could be picked up and thrown by
the blades. Tall grass can hide obstacles.
Be sure the area is clear of people before mowing. Stop
machine if anyone enters the area.
GB - 6