Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
o
PeratinG tHe unit
DE
The power plug is intended as a separator. Make sure
that the power plug is plugged into an easily reachable
EN
wall socket.
A. Before using the device, make sure that the voltage indicated
FR
on the device corresponds to the local mains voltage. Insert the
power plug (A) into the power socket.
IT
B. Open the device by lifting the cover (B) upward.
C. Fill the cleaning tank (C) with water or approved cleaning liquid to
ES
the maximum filling level (H).
NL
D. Place the object to be cleaned directly into the cleaning basket (I)
or use one of the provided holders (J - L) and close the cover (B).
RU
E. Press the power switch button (E) to switch on the device.
F. Select the desired cleaning time (1:30, 3:00, 4:30, 6:00, 7:30
PL
minutes) by pressing the timer button (F). The times will be shown
on the LCD display (D).
SE
G. To start the cleaning process, press the start button (G). The
selected cleaning time will now be counted backwards and
FI
the device will stop automatically when the time runs out.
H. Now you can open the cover (B) again and take out the
cleaned object.
Publicidad
Tabla de contenido
