Product Operation; Using The Simplespa; Cleaning The Simplespa; Short Term Non-Use - brondell SimpleSpa SS-150 Manual Del Propietário

PRODUCT OPERATION

USING THE SIMPLESPA

To clean the bidet nozzle, turn the control arm to the left towards the
"Nozzle Cleaning" position and water will wash over the nozzle .
For the general bidet wash function, turn the control arm to the right
towards the "Wash" position .
• The further the arm is turned, the higher the water pressure will be .
• To lower the water pressure, turn the arm back towards the center .
• To stop the flow of water, rotate the arm to center so it sits flat .
MAINTENANCE

CLEANING THE SIMPLESPA

To clean the nozzle, open the Nozzle Guard door
by pulling it gently open on the right side . With the
nozzle revealed, pull down on the nozzle cap, and
clean the spray holes and nozzle using a toothbrush
or soft cloth and mild detergent (such as dish soap) .
When cleaning, be careful not to drop or flush the
nozzle cap . Periodically tighten the cap so it doesn't
become loose with use and cleaning .
To clean the SimpleSpa, use a mild cleaner such as
Simple Green or Windex spray . Do not scrub or use
harsh, abrasive products to clean the SimpleSpa,
which may scratch the product .

SHORT TERM NON-USE

If the product will not be used for more than a few weeks, you may consider shutting
the water supply off at the wall for extra precaution .
9