Installation-Additional Components; Satellite Battery Pack; Extension Brackets; Spacer Blocks - Levolor Real Wood & Faux Wood Blinds Instalación

INSTALLATION–ADDITIONAL COMPONENTS
INSTALL SATELLITE BATTERY PACK (optional)
•
Mark position of satellite battery wall mount bracket.
— The satellite battery may be mounted in any orientation.
— Position the battery pack close to the power cable.
— The double-side tape is optionally provided to aid installation.
•
Screw in the wall mount bracket.
•
Insert batteries into battery wand, following
the markings for correct orientation.
•
Install the battery pack into the wall bracket.
•
Attach the optional battery wand cover over
the satellite bracket assembly.
— Note that the cover is paintable.
•
Plug power cord into battery wand.
•
Plug the other end of the extension cable
into the socket in the battery pack.
EXTENSION BRACKETS (optional)
•
Optional extension brackets offers clearance
for obstructions.
•
Outside mounting extension brackets will
provide 2–4" clearance between the headrail
and mounting surface. Assemble extension
bracket as shown.
•
Secure an extension bracket to each standard
mounting bracket.
SPACER BLOCKS (optional)
•
Outside mounting spacer blocks will provide
an additional ⁄
3
•
If spacers are used, longer screws may
be required to ensure a secure installation
(not provided).
! CAUTION: Do not use more than one spacer block. Using more than one
spacer block could cause blind to fall resulting in possible injury.
12
Motorized Tilt Operation
" clearance as shown.
8
Wall Mount Bracket
Socket
Socket
Slot
Slot
Battery Wand Cover
Socket
Socket
Battery Pack Cover
Power Cable
Power Cable
from Shading
from Shade
Wall Mount Bracket
Battery Wand Cover
Battery Pack Cover
Extension
Extension
Cable Cable