Before Each Use; Warnings For Use; Assembling; Assembling For Short Grab Bar - Mopedia RS975-36 Manual De Instrucciones

8. BEFORE EACH USE

• Always check the attachment and condition of suction cup thanks to the indicator
on the handle
• Check if the frame is damaged in order to guarantee a safe use for people and things
• Check the correct assembly of the device

9. WARNINGS FOR USE

• You can not sit on the grab bar;
• If the grab bar is used in unfavorable conditions (eg. Suckers damaged or
worn), the holding may disappear suddenly;
• Under water the grab bar holding decreases;
• The holding of the suction cups decreases in the presence of high
temperatures and high altitudes;
• Keep the suckers away from direct sunlight, lose elasticity. It should not
attach the handles to the outside surface illuminated type windows;
• If the handle remains attached in the same place for a prolonged period of
time, to the removal, the underlying surface may remain blotchy.

10. ASSEMBLING

10.1 Assembling for short grab bar

The short grab bar is supplied already assembled.

10.2 Grab bar positioning

1. Thoroughly clean and the surface with alcohol wipe and allow to dry and check
the condition of the suction cups. Do not use if damaged, cracked or split.
2. Raise both levers; place the grab bar so that both suction cups lie firmly and
completely on a smooth surface.
3. Hold one end and press on one lever with your palm, You should feel resistance
as the suction cup tightens.
4. Check that the handle adhered well to the surface, otherwise reposition.

10.3 Removal

1. Lift each of the two levers.
2. If suction remains, gently lift one edge with a finger.
3. Do not use a sharp instrument which may damage the suction cup.
4. Always to keep the levers flip up until next use.

10.4 Patented suction indicator

The indicator seal (patented system), consists in an alerter of the actual adhesion of the suction cup
to the support thus ensuring maximum grip and safety during use.
5