Operating Instructions - TSI Quest NI-100 Manual Del Usuario

Дəлдік: ±3дБ
Қуаттетік: Lithium Polymer
Батареяның жұмыс істеу ұзақтылығы: зарядт түбіне шейін
шамамен 200 жұмыс сағаты талап етіледі
Батареяның қызмет көрсету уақыты: шамамен 2 жыл заряд
циклдері .
Зарядтау: Мини USB кабелі (жеке сатылады)
An

OPERATING INSTRUCTIONS

See Figure 1.
1. Attach the Noise Indicator with badge clip to clothing where it is
clearly visible.
2. To switch On, press and hold On/Off button until solid red and
green lights appear and then release button.
During use:
Flashing Green, with 2 second intervals indicates noise level below
85dB(A).
Flashing Red, with 2 second intervals indicates noise level above
85dB(A).
3. To switch Off, press and hold On/Off button until LEDs
illuminate solid red and green and then disappear. Release the
button.
NOTE
If not manually switched off the noise indicator will automatically
power off after approximately 10 hours.
Charging Instructions
See Figure 2.
1. Plug mini-USB cable from PC into external port of TSI NI-100
®
Noise Indicator. The LED lights will flash alternately red and green.
Allow at least 4 hours to fully charge the battery.
2. When fully charged the green LED will double flash every 5
seconds.
^ W A R N I N G
The TSI NI-100 Noise Indicator is a simple noise check indicator
®
designed to help the wearer understand when hearing protectors
-47- Noise Indicator Model NI-100