Operating Instructions; Charging Instructions - TSI Quest NI-100 Manual Del Usuario

Zapnuto/Vypnuto, Vypínač On/Off, On/Off gumb, ‫כפתור‬
/ On/Off nupp, Ieslēgšanas/ Izslēgšanas taustiņš,
‫הדלקה‬ ‫כיבוי‬
Įjungimo/išjungimo mygtukas, Buton On/Off, Кнопка Вкл/Выкл,
Кнопка включення / вимикання, Tipka On/Off, Бутон On/Off (за
включване и изключване), On/Off dugme, Aç/Kapa Butonu,
Қосу/Өшіру түймесі.
GZXO

OPERATING INSTRUCTIONS

See Figure 1.
1. Attach the Noise Indicator to clothing where it is clearly visible
using badge clip.
2. To switch On, press and hold On/Off button until solid red and
green lights appear and then release button.
During use:
Flashing Green, with 2 second intervals indicates noise level
below 85 dB(A).
Flashing Red, with 2 second intervals indicates noise level above
85 dB(A).
3. To switch Off, press and hold On/Off button until LEDs
illuminate solid red and green and then disappear. Release the
button.
NOTE
If not manually switched off the noise indicator will automatically
power off after approximately 10 hours.

Charging Instructions

See Figure 2.
1. Plug mini-USB cable from PC into external port of TSI NI-100
®
Noise Indicator.
The LED lights will flash alternately red and green.
Allow at least 4 hours to fully charge the battery.
2. When fully charged the green LED will double flash every 5
seconds.
^ W A R N I N G
The NI-100 Noise Indicator is a simple noise check indicator
designed to help the wearer understand when hearing protectors
-5- Noise Indicator Model NI-100