Publicidad
Idiomas disponibles
Idiomas disponibles
Weather Station Adjustment
Instruction Sheet
Assembly:
Time: 5-10 minutes
Tools Required: Screwdriver, Hammer
Usage:
When using this weather station outside, place unit in shaded area away from direct
sunlight for most accurate reading of gauges, as direct sunlight may cause some deviation
in gauge readings.
Troubleshooting (Adjusting Gauges):
The various gauges contained in this product are calibrated to reflect the current atmo-
spheric conditions present during the time of this product's assembly. Vibration during the
transportation of this product may alter the preset readings and accuracy of each gauge.
To ensure the proper reading of each gauge, it is suggested that each unit be checked for
accuracy before use. For accurate atmospheric measurements refer to a reliable source
such as the newspaper, television, radio, and/or the internet. If adjustment is necessary,
please follow the below instructions for each gauge:
1) Temperature gauge adjustment:
a) Remove round plastic cap to expose adjustment dial.
b) To adjust the Temperature reading, turn adjustment dial to adjust needle on the
face of the unit.
Note: Temperature gauge accuracy is +/- 2 degrees Celsius or +/-3 degrees
Fahrenheit.
2) Barometer gauge adjustment:
a) To adjust Barometer readings, insert small screwdriver into hole marked "Humid"
to adjust needle on the face of the unit.
Note: Barometer gauge is very sensitive and is set to allow only 1/4 turn,
either to the left or the right.
3) Humidity gauge adjustment:
a) To adjust the Humidity reading, turn adjustment knob marked "Humid" to adjust
needle on the face of the unit.
b) It is suggested that adjusting humidity gauge be done every six months.
Note: Humidity gauge accuracy is +/- 5%.
E3
All manuals and user guides at all-guides.com
Adjustable Knob for Temperature
Adjustable Hole for Barometer
Adjustable Knob for Humidity
E4
Remove round plastic cap to
adjust temperature
MADE IN CHINA
Publicidad
