Operation Instructions - Telstar TAI012112MD Manual De Instrucciones

OPERATION INSTRUCTIONS

FUNCIÓ N
NOTE: This manual does not include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.
Operating temperature
Modo
Temperature
Room
Temperature
Outdoor
Temperature
NOTE:
1. Optimum performance will be achieved within these operating temperatures. If air
conditioner is used outside of the above conditions, certain safety protection features
might come into operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is
high(over
80%) , condensed water may drip out of the unit. Please sets the vertical air flow louver
to its maximum angle (vertically to the floor), and set HIGH fan mode.
Suggestion: For the unit adopts an Electric Heater, when the outside ambient
temperature is below 0OC (32OF), we strongly recommend you to keep the machine
plugged in order to guarantee it running smoothly.
Manual operation
Units are equipped with a switch to run emergency operation mode. It can be accessed
by opening the front panel. This switch is used for manual operation in case the remote
controller fails to work or maintenance necessary.
Manual
switch
CAUTION:
-This switch is used for testing purposes only. You had better not choose it.
-To restore the remote controller operation, use the remote controller directly.
GUÍ A DE USO
Cooling operation
17 C~32 C O O
(62 F~90 F)
O O
0 50
32 122
-15 50 5
For the models with low
temperature cooling
N OTE: The unit must be turned off before operating the
manual control button. If the unit is operational,
continue pressing the manual control button until the
unit is off.
1- Open and lift the front panel up to an angle until it
remains fixed with a clicking sound.
AUTO/COOL
2- One press of the manual control switch will lead to
the forced AUTO operation. If press the switch twice
within five seconds, the unit will operate under forced
COOL operation
3- Close the panel firmly to its original position.
Healing operation Drying operation
0 C~30 C
O
(32 F~86 F) O
-15
5
122
A/C
TAI012110MD
10 C~32 C
O
O
(50 F~90 F) O
O
30 0 50
86 32 122
O
O