Tabla de contenido
Publicidad
Assembling the Blower
Push the blower tube over
the discharge port and
locking pin
24002
Locking Pin
Straight Tube
1
Rotate clockwise to lock
24003
2
Place the blower upright on the ground
or on a sturdy work surface.
1. Grasp the blower tube as shown, and
push the tube over the blower
discharge port and locking pins.
2. Lock the blower tube to the blower
discharge port by rotating the tube
as shown.
3. Grasp the nozzle with the label
"TOP" positioned as shown, and then
push the nozzle over the straight
tube and locking pins.
4. Lock the nozzle to the straight tube by
rotating the nozzle as shown.
Push the nozzle
Blower Tube
over the blower
tube and locking
24004
Locking Pin
3
Nozzle
Rotate clockwise to lock
Label "TOP" must
face up
4
IMPORTANT!
Blower tube installation affects both
blower balance and performance! The
tube and nozzle are correctly installed
when the label "Top" is visible to the
operator during normal operation.
WARNING!
Danger from rotating impeller!
Stop the engine before installing or
removing the blower tubes! Never
perform any maintenance or
assembly procedures on this unit
while the engine is running!
pin
24005
5
Publicidad
Tabla de contenido
