How To Use - TaoTronics Hello TT-BH08 Manual Del Usuario

How to Use

1.Charging
1) Connect the charging port with any USB charging adapter or
active computer USB port
2) Charging will start automatically with LED indicator turning red
3) The headset is fully charged when LED indicator turns blue
▲Note:
Charge the headset at least once every 6 months when not using
for a long time.
2.Pairing
To pair with other Bluetooth device, you must rst bring the headset
into pairing mode;
1) Make sure the headset and your Bluetooth device are next to
each other (within 3 feet);
2) Press and hold the multifunction button for approximately 3
seconds to turn on the headset;
3) Once the headset is on, it will go into pairing mode automatically
with the LED indicator ashes red and blue alternately;
4) Activate Bluetooth function on your phone and search for the
nearby Bluetooth connection:
• For iPhone : Settings > Bluetooth > On;
• For Android : Settings >Wireless & Networks >Bluetooth: On >
Scan for devices;
5) Find "TaoTronics TT-BH08" in the search results. Tap on the name to
connect. Once connected, only the blue LED will remain on.
▲Note:
• If a PIN code is required for pairing, please try "0000" or "8888" (4
zeros or 4 eights)
• The Bluetooth headset can remember previous paired devices. If
you have previously paired the headset with a device, simply turn
on your device and the headset (by pressing the multifunction
button for 3 seconds), they will connect automatically with no
need to go into pairing mode.
3.Pairing with two devices at the same time
Although you can pair with two devices, only one of them can play
music with the headset at a time. To pair with two devices:
1) Follow previous instructions in the "Pairing" section to pair the
TT-BH08 with your rst device;
2) Turn off the Bluetooth function of your rst device, follow the
"Pairing" instructions again to pair and connect to your second
device;
3) With Bluetooth function on both devices turned on, simply restart
the headset, it will automatically connect with both devices at
the same time (within 5 seconds).
4) To switch between the two devices, simply pause the music on the
rst device and play music on the second device or vice versa.
4.How to Wear
Please wear the headset as shown in the diagram:
▲Note:
• Please note the "L" and "R" markings on the headset, they
correspond to left side and right side respectively;
• The curve of the ear hook is engineered to t different ear shapes.
You can adjust the ear hooks to best t your ears;
• In addition to the headset, two pairs of different size ear buds are
included in the package. Please try them out and nd the most
comfortable t for you.
05/06