Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions – LED Recessed Canopy
N
ote:
This lighting fixture is designed for outdoor lighting
services, and should not be used in high ambient
temperature enclosures or insulated ceilings. It
must be stored in a dry location prior to installation.
Do not expose lighting fixture to rain, dust or other
environmental conditions prior to installation. Best
results will be obtained if installed and maintained
according to the following recommendations. Failure
to follow instructions could result in damage to
product and void warranties.
Intended for New Construction and Retrofit to Existing
Installations Where The Ceiling Opening is Less Than 14"
Square.
N
ote:
Care must be taken not to set lighting fixture
down on optical lenses or lift the fixture in the
lens area.
APPLICATIONS:
• Minimum 90ºC Supply Conductors when connections
are made external to the unit.
• Rated for 40ºC (104ºF) ambient.
• Suitable for wet location.
• Petroleum recessed Canopy luminaire only with
minimum 16 inch rail spacing.
• Construction is suitable for down mount only.
• Canopy thickness not to exceed 4mm or 5/32".
• Canopy must be flat; no waved patterns.
Tools Required
Philips screw driver, electrical wiring tools (Not provided).
Industrial strength sealant/adhesive silicone or acrylic latex
caulk (Not provided).
14-1/2"
[368mm]
Figure 1a.
2
COOPER LIGHTING SOLUTIONS
9-1/2"
[241mm]
(4) Sheet Metal
Screw Location
14"
[356mm]
14"
[356mm]
IB515007EN
Installation instructions
(4) Sheet
Metal Screws
Figure 1b.
Aim L90 Throw
Direction
Aim R90 Throw
Direction
Figure 2.
Figure 3.
Standard Aim
Throw Direction
Publicidad
