Publicidad
Idiomas disponibles
Idiomas disponibles
Master Nailer™
Duo 35
Congratulations!
On the purchase of your Tacwise power tool. Your tool will perform
to your satisfaction for a long time if handled in accordance with our
Safety and Operating instructions.
Save this manual for future reference
Package Contents
Please refer to the product packaging for details of pack contents.
Technical Data
Tool
Model no.
Fitted plug
Single unit packaging
Input voltage
Fasteners: Type
Fasteners: length (mm)
Fasteners: Type
Fasteners: length (mm)
Max. firing speed
Magazine capacity
Min. nailing/stapling
distance from wall
Weight
Fuses in Plug
UK & Ireland
Unpacking
This product has been supplied completely assembled.
• Carefully remove the tool and accessories from the box.
• Make sure that all items listed in the packing list are included.
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or
modification is misuse and could result in a hazardous condition
leading to a personal injury.
• Inspect the tool carefully to make sure no breakage or damage
occurred during transit.
• Do not discard the packing material until you have carefully
inspected and satisfactorily operated the tool.
•
If any parts are damaged or missing, please email
service@tacwise.com for assistance. Do not operate this tool until
the missing or damaged parts are replaced. Failure to do so could
result in a personal injury. Whilst every effort has been made to
ensure accuracy of information contained within this manual, the
Tacwise policy is one of continuous improvement to our products
and as such we reserve the right to change the product
specification without prior notice.
WARNING! Before use carefully read and understand
all instructions.
Failure to do so could result in electric shock, fire and/or serious
personal injury. The term "power tool" in all of the warnings listed
below refers to your mains-operated (corded) power tool.
Duo 35
1165
1167
UK
Euro
Case
Case
230V 50Hz
Tacwise 180 Nails
15, 20, 25, 30, 32, 35
Tacwise 91 Staples
15, 20, 25, 30
30 Nails/Staples per minute
100 Nails or Staples
2mm (without rubber nose)
2.10kgs
220-240v tools
13 Amperes
CE – Declaration of Conformity
Duo 35
Tacwise declares that these power tools have been designed in
compliance with the Regulations and Standards of the European
Directives.
Quality Department, Tacwise Group Plc – UK
General Safety Instructions
Important.
Tacwise recommends that this power tool should not be
modified or used for any application other than that for which it was
designed. If you are unsure of its relative applications do not hesitate
to contact us and we will advise you.
Know your power tool
Read and understand the manual and labels affixed to the power tool.
Learn its application and limitations as well as the specific potential
hazards particular to this power tool. For any queries relating to safety
matters on this power tool, please email: service@tacwise.com.
Work Area
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Keep children and pets away. All visitors should be kept a safe
distance from work area.
• Avoid dangerous environments. Do not use power tools in damp
or wet locations, or expose them to rain. Provide adequate space
surrounding the work area. Do not use in environments with a
potentially explosive atmosphere, such as in the presence of
flammable liquids, gases or dust; power tools will create sparks
which may ignite the dust or fumes.
• Secure work. Use clamps or a vice to hold work. This frees both
hands to operate the power tool.
Personal Safety
• Stay alert. Always watch what you are doing and use common
sense. Do not operate a power tool when you are tired or under
the influence of medication, alcohol or drugs.
• Wear proper clothing. Do not wear loose clothing or jewellery
that can catch in moving parts. Non-slip footwear is
recommended. Contain long hair. Roll long sleeves above the
elbow.
• Avoid accidental starting. Make sure the switch is in the locked
or off position before plugging the machine into the power supply.
• Remove adjusting keys and wrenches. Ensure that all keys and
adjusting wrenches are removed from the power tool before
turning it on. A wrench or a key that is left attached to a rotating
part of the power tool may result in personal injury.
• Do not over reach or use on unstable surfaces. Keep proper
footing and balance at all times.
• Use safety equipment. Dust mask, non-skid safety shoes,
hardhat, or hearing protection must be used for appropriate
conditions. Wear CE approved safety goggles at all times. Normal
spectacles only have impact resistant lenses; they are NOT
safety glasses.
Electrical Safety
• Disconnect power to the tool. When not in use, before servicing
or when changing accessories such as nails/staples, etc.
• Do not expose power tools to rain or wet conditions.
• Power tool plugs must match the outlet. Never modify the plug
5
Publicidad
