Setup & Functions; Inserting The Battery - HMM Diagnostics smartLAB Manual De Usuario

III. Setup & Functions

Inserting the battery

Note: After a battery change, you need to set the time of the device again. Your sa-
ved data will stay on your device when changing the batteries. An automatic setting
ofyourdataisenabledbycertainreceivingdevices.Pleasefindmoreinformation
under Heart Beat Mode.
30
In order to change/ insert the battery, you need to
unscrew the battery lid on the back of the device. Place
the coin cell with the plus side to top into the opening.
If you change the battery, use the screwdriver to lever
off the battery. Afterwards, put the lid back onto the
battery and screw it down again.
Pic. 2