Mounting The Carrying Cord - HMM Diagnostics smartLAB Manual De Usuario

Mounting the carrying cord

You can wear your smartLAB
walk B with the carrying cord included in the set. To
®
do so, you will have to connect the cord to the device by doing the following steps:
Push the thin end of the cord through the two tiny eyes at the back side of the device.
Pushing together the cord a little bit makes it easier to squeeze it through the eyes
(pic. 3). After that, push the thicker end of the cord through the loop on the thin end
and pull it tight (pic. 4)
Pic. 3 Pic. 4
31