General Pipe Cleaners BD Drain Gun Instrucciones De Operación página 6

BD Drain Gun™
TROUBLE SHOOTING GUIDE (TABLE 2)
Problem Probable Cause
Cable kinks or breaks. Operator forcing the cable.
Too much slack between machine and drain. Do not allow more than six inches between machine and drain.
Cable used in wrong size drain line.
Cable exposed to acid
Cable tangles in drum. Operator forcing the cable.
Machine run in reverse.
Motor does not run. Trigger in neutral (off) position.
See page 19 and 20 for Parts List and Schematic.
Solution
Do not force the cable. Let the cutter do the work.
A cable that is too large or too small in diameter for a line is more
likely to kink. (Consult Table 1—Cable Applications.)
Clean and oil cables regularly.
Do not force the cable. Let the cutter do the work.
Do not run machine in reverse to retract cable from drain.
Use reverse only if cable is caught in line.
Switch Trigger to either Forward or Reverse.
6