Indicator Lights - Tripp-Lite OMNIPRO 500 El Manual Del Propietario

Indicator Lights

All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned on.
This green light will turn ON whenever your UPS is plugged in and
receiving normal AC line power.
This red light will turn ON when your UPS is providing your
equipment with battery power.
This yellow light will turn ON continuously when the UPS
switches to battery to indicate that the UPS's battery is less than
fully charged. If it stays on after twelve hours of charging, contact
Tripp Lite for service. This light will flash after you set the "OFF/
ON" Switch to the "OFF" position to indicate that the UPS will not
provide battery backup during a blackout or brownout.
Whenever your UPS is correcting high or low AC line voltage, this
green light will turn ON with a gentle click. This is a normal,
automatic operation of your UPS, and no action is required on
your part.
Other UPS Features
AC Receptacles
The receptacles provide your connected equipment with AC line
power during normal operation. They will provide battery power
during power failures only if the "OFF/ON" Switch is set to the
"ON" position. The receptacles also protect your equipment
against damaging surges and line noise. Select models, how-
ever, feature "surge-only" receptacles (identified on the back of
your UPS) that provide the non-essential peripherals plugged
into the receptacles with surge protection without committing
precious battery power to support them during power failures.
RJ11 Telephone Jacks
These jacks protect your equipment against telephone line
surges. Connecting your equipment to these jacks is optional.
Your UPS will still work properly without this connection.
Battery Replacement Door
Under normal conditions, the original battery in your UPS will
last several years. Battery replacement should be performed
only by qualified service personnel. Refer to "Battery Warnings"
in the Safety section on page 2.
5