What Is Included; Replacing The Fuse; Dmx Linking - Chauvet Professional ROGUE R3 BEAM Guía De Referencia Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

What is Included

Rogue R3 Beam
®
Neutrik
powerCON
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
It is possible to link up to 3 Rogue R3 Beam products at 120 V, 6 products at 208 V, or 7 products at 230 V. Never exceed
this number. Power-linking cords can be purchased separately from Chauvet.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

Replacing the Fuse

1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Rogue R3 Beam will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is
available at www.chauvetprofessional.com.
DMX Connection
The Rogue R3 Beam uses a 3- or 5-pin DMX data connection for its DMX personalities: 16CH and 19CH. See the User
Manual for information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer, as not all DMX controllers
have this capability. The Rogue R3 Beam supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Rogue R3 Beam QRG Rev. 4
QUICK REFERENCE GUIDE
®
power cord
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
2 Omega brackets with mounting hardware
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
2

Publicidad

Tabla de contenido
loading

Tabla de contenido