Concealed Duct High Static Pressure
5
TIMER OPERATION
• Three timer modes are available: (Setting of up to 168 hours is enabled.)
Off timer
Repeat Off timer
On timer
Set
1
Push
The timer mode changes with every push of the button.
Off
(Off timer)
•
and timer display flashes.
2
Push
• With every push of
by 0.5 hr (30 minutes).
When setting a time more than 24 hours for timer
operation, timer can be set in increments of 1 hr.
The maximum set time is 168hr (7 days).
The remote control displays the set time with time
(between 0.5 and 23.5 hours) (*
and time (24 hours or more) (*
• With every push of
by 0.5 hr (30 minutes) (0.5 - 23.5 hours) or 1 hr (24 -
168 hours).
Example of remote control display
• 23.5 hours (*
• 34 hours (*
Number of days Time
shows 1 day (24 hours).
shows 10 hours. (Total 34 hours)
13-EN
: The unit stops when the set time is reached.
: The unit stops daily when the set time is reached.
: The unit starts when the set time is reached.
1
3
button.
Off
(Repeat Off timer)
(On timer)
No display
to select "set time".
button, the set time increases
1
) or number of days
2
) as shown below.
button, the set time decreases
1
)
2
)
3
Push
•
and
(When On timer is activated, time and On timer
4
Cancel timer operation
On
Push
Timer icon disappears.
NOTE
• When the operation stops after the timer reached the preset
time, the Repeat Off timer resumes the operation by
pushing
time of the timer has reached the set time.
• When you push
air conditioner is active, the indication of the timer function
disappears and then appears again after about 5
seconds.
This is due to normal processing of the remote controller.
– 13 –
Owner's Manual
2
4
button.
icon disappears and time display goes on,
or
icon flashes.
are icons and other icons disappear.)
button.
button and stops the operation after the
while the Off timer function of the