Kenwood FDP30 Manual De Instrucciones página 6

Do not touch the sharp blades – Keep the blade assembly away from
l
children.
Never remove the mill until the blades have completely stopped.
l
The appliance will not work if the mill is incorrectly fitted.
l
Do not process hot ingredients in the mill allow to cool down to room
l
temperature before processing.
mini chopper/mill
To ensure the long life of your mini chopper/mill, never run for longer than
l
30 seconds. Switch off as soon as you have got the right consistency.
The processing of spices is not recommended as they may damage the
l
plastic parts.
grinding mill
To ensure the long life of your grinding mill, never run for longer than 60
l
seconds. Switch off as soon as you have got the right consistency.
Do not process turmeric root as it is too hard and may damage the
l
blades.
slicing/grating disc
Never remove the lid until the cutting disc has completely stopped.
l
Handle the cutting discs with care - they are extremely sharp.
l
before plugging in
Make sure your electricity supply is the same as the one
l
shown on the underside of your appliance.
This appliance conforms to EC Regulation 1935/2004 on
l
materials and articles intended to come into contact with
food.
before using for the first time
1 Remove the plastic blade covers from the knife blade.
Take care the blades are very sharp. These covers
should be discarded as they are to protect the blade during
manufacture and transit only.
2 Wash the parts see "care and cleaning".
key
processor
pusher
1
feed tube
2
lid
3
bowl
4
detachable drive shaft
5
power unit
6
speed/pulse control
7
safety interlocks
8
cord storage (at back)
9
attachments
Not all of the attachments listed below may be included with
your food processor. Attachments are dependent upon the
model variant. Refer to "service and customer care" section
for information on how to buy an attachment not included in
pack.
blender
(if supplied)
blade assembly

sealing ring

goblet

filler cap

lid

mini chopper /mill
blade assembly

sealing ring

jar

grinding mill
(if supplied)
mill lid

grinding mill blade assembly

knife blade

dough tool (if supplied)

emulsifying tool

thick slicing/coarse grating disc

citrus juicer (if supplied)

thin slicing/fine grating disc (if supplied)

to use your food processor
1 Fit the detachable drive shaft onto the power unit
2 Then fit the bowl by aligning the
on the power unit, turn clockwise
3 Fit an attachment over the bowl drive shaft.
Always fit the bowl and attachment onto the processor
l
before adding ingredients.
4
(if supplied)
.
1
on the bowl with the
until it locks .
2