Spare Parts; Troubleshooting - Würth DCN 4590 Traducción Del Manual De Instrucciones De Servicio Original

Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with
the legal/country-specific regulations (proof of
purchase through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Fault
Air leaks at the bottom or
top of the nailer or near the
trigger
Nailer does not work or works
slowly
Frequent faults
26
If, in spite of careful manufacturing and test proce-
dures, the device becomes faulty, contact Würth
masterService to arrange a repair.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is avail-
able online at http://www.wuerth.com/parts-
manager. Alternatively, contact your local Würth
agency for a hardcopy.

Troubleshooting

Possible cause
Loose screws
Worn or damaged O-rings or seals
Worn or damaged O-rings or
anti-shock pads
Insufficient compressed air supply
Insufficient lubrication
Worn or damaged O-rings or
anti-shock pads
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged drive

Spare parts

Remedy
Tighten screws
Fit repair kit
Fit repair kit
Ensure an adequate compressed
air supply
Lubricate nailer
Fit repair kit
Ensure fasteners are the correct size
Changing the fasteners
Tighten screws, clean magazine
Fit drive maintenance kit