Before Initial Use; Setting Up The Device; Functions - Maxx-world N8WERK Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

coating of the grill plates. We recom-
mend the use of heat-resistant kitchen
utensils made from wood or plastic.
■ Switch off the device and pull the
mains plug out of the plug socket if an
error occurs during operation, when
there is a power cut or before a thun-
derstorm.
■ When you pull the mains plug out of
the plug socket, always pull on the
mains plug and never the mains cable!
■ Protect the device from other heat
sources, naked fl ames, sub-zero
temperatures, persistent moisture, wet
conditions and impacts.
■ Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and to
avoid possible damage.

BEFORE INITIAL USE

There may still be some production
residues on the device. To avoid harmful
effects to your health, clean the device
thoroughly before you fi rst use it and then
heat it up for a few minutes. To do this,
follow the instructions in the "Cleaning and
Storage", "Setting Up the Device" and "Use"
chapters.

SETTING UP THE DEVICE

Please Note!
■ Do not place the device below kitchen
wall units or similar cupboards. The
rising steam could cause damage to
them!
■ The device may only be operated in a
horizontal position, never on its side or
tilted.
1. Always set up the closed device with
a clear space at the sides (at least 20
14
cm) and clear space above it (at least
30 cm) on a fl at, solid and heat-re-
sistant surface that is resistant to fat
splashing.
2. Insert the grill plates (4 and 9) into the
device: To do this, place one grill plate
at a slight angle with the recesses into
the locking lugs (3 and 8) on the device
and press down. The grill plate must
engage audibly (Picture C).
3. Insert the fat collecting tray (6) into the
bottom of the housing.

FUNCTIONS

SWITCH ON / OFF AND
START / STOP
The device is switched on or off via the
fi eld
(21).
The preheating / grilling process is started
or stopped via the fi eld
The grilling process cannot be
paused! If it is ended via the
fi eld
, it has to be completely
restarted.
PREHEATING
The device automatically preheats fi rst on
each mode (apart from manual mode),
which is indicated by the fi eld
fl ashing. The device has only reached the
desired temperature for the selected mode
once you hear 4 short and 1 long beep.
PRESET MODES
The device has 6 preset modes (13, 18
and 19) on which the temperature is set
automatically.
ideal for burgers
ideal for grilled chicken, chicken breast
fi llets or similar
ideal for sandwiches, baguettes or
similar
(15).
(20)

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

09595200200

Tabla de contenido