Chauvet DJ COLORband PiX-M Guía De Referencia Rápida página 4

COLORband™ PiX-M QRG
AC Power
Power Linking
Fuse
Replacement
Mounting
Mounting
Diagram
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 8 COLORband™ PiX-M products at 120 VAC and
15 units at 230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse
holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Mounting Clamps
Hanging/Mounting
Bracket
4
EN
Safety
Cable
Rubber Feet (x4)
for floor mounting