Heating Power - therm-ic PowerPack Basic Modo De Empleo

Turning the device off:
Note:
If the PowerPack Basic is not used for 24 hours, it
will turn off automatically.
Setting the heat level:
The control buttons on the PowerPacks Basic allow
for 3 different levels of heating.
Each time the control button "+" button is pressed
(for approx. 1 second), the heat level is increased;
with the "–" button, you can lower the heat level.
The LEDs on the control display show the current
heat level (1 LED = low heat, 3 LEDs = high heat).
Press and hold (approx. 3
sec.) the control button "-"
(until the status display
turns off) to turn off the
PowerPack Basic.
H E A TI N G P O WE R
Max. temperature*
Level
(°C / °F)
1 37°C / 99°F
2 45°C / 113°F
3 70°C / 158°F
* Measured directly on the heating element under
laboratory conditions
For optimum heat output, Therm-ic recommend the
following batteries or battery pack types.
Alkaline batteries, AA, 1.5 V
NiMH battery, AA, 1.2 V (rechargeable)
If other types of batteries are used, the heat
produced may not be sufficient for use in very cold
temperatures. When purchasing rechargeable
Heating period per
battery charge
depending on the
battery selection
depending on the
battery selection
depending on the
battery selection
11