SAFETY INFORMATION
CAUTION
RISK OF ELECTRIC SHOCK:
CAUTION:
VESTEL ELECTRIC VEHICLE CHARGER STATION SHALL
BE MOUNTED BY A LICENSED OR AN EXPERIENCED
ELECTRICIAN IN ALIGN WITH ANY REGIONAL OR
NATIONAL ELECTRIC REGULATIONS AND STANDARDS IN
EFFECT.
CAUTION
Electrıc vehicle charging station AC
grid connection and load planning
shall be reviewed and approved
by authorities as specified by the regional or national electric
regulations and standards in effect. For multiple electric vehicle
charger installations the load plan shall be established accordingly.
The manufacturer shall not be held liable directly or indirectly for
any reason whatsoever in the event of damages and risks that are
borne of errors due to AC grid supply connection or load planning.
IMPORTANT - Prior to installing or operation
read these instructions carefully.
SAFETY WARNINGS
•
Keep the guide at a safe place. Please keep
this safety and user's manual at a safe place
for future reference.
•
Check the voltage specified on nominal rate
plates and do not use the charger on grid
voltages that does not match this rate.
•
Do not continue to use the devices that you
suspect its normal operation or got damaged in
any way - cut off the power supply via the mains
supply circuit breaker (MCB or RCCB). Consult
the nearest service workshop unit.
•
During charging the environmental temperature
shall be between –30 °C and +50 °C with the
relative humidity between 5% and 95%. Use the
charger only at the conditions complying these
operation parameters.
•
Charger is suitable to be used outdoors and
indoors, and may be used in public areas.
•
To minimize the risk of fire, electric shock or
product damage, do not expose this device
to extreme rain, snow, storm or other adverse
weather conditions. Furthermore ensure that
water is not poured or splashed on the charger.
•
Do not touch the charger clamps, electrical
vehicle socket or other dangerous electrical parts
with sharp metallic items.
•
Do not let the charger be exposed to heat
sources and ensure that the charger is kept away
from easily ignitable, explosive, abrasive and
flammable materials, chemicals and their vapour.
•
Explosion Risk. This device includes parts that
generate arcs or sparks which shall not be
exposed to easily ignitable vapours.
•
This device is only suitable for charging the
vehicles that do not require ventilation during
charging.
•
In order to prevent explosion and electric shock
risk, the specified Circuit Breaker and Leakage
Current Relay shall be connected to the building
mains circuit.
•
The lowest section of the socket shall be 0.4 m
to 1.5 m high from the floor.
WARNING
or mentally challenged or inexperienced
individuals (including children) shall not use
this device without the supervision of their
guardian.
W A R N I N G A B O U T G R O U N D
CONNECTION
•
Electric Vehicle Charging Station shall be
connected to central ground system. The ground
conductor coming to the charging station shall
be connected to the ground conductor of the
charging station.
supply connections the installer or the purchaser
is liable.
•
To minimize the electric shock risk, only connect
to the lines that have adequate grounding.
ELECTRIC CORDS, PLUGS and
CHARGER CORD WARNINGS
•
On the charging station side the vehicle charger
cord shall be compatible with Type 2 socket.
•
Damaged electric cord/plug or electric vehicle
may cause fire or electric shock. If the flexible
electric cord or electric vehicle cord is worn out,
its sheathing is damaged or there are signs of
any other damage, do not use this appliance.
•
Ensure the charging cord is placed appropriately;
ensure that it is not stepped on, no vehicle run
over it or shall not be exposed to damage or
tensioning.
•
Do not pull the charger cord with a force or do
not damage it with sharp objects.
•
Do not touch the electric cord/plug or electric
vehicle cord with wet hands, otherwise it may
cause short circuiting or electric shock.
English - 2 -
: Physically, cognitively
For charger ground and