Checking After Installation/Placing Your Child - CARMATE GUIA PASO A PASO Manual Del Usuario

Checking after installation/
placing your child
Verification after installation
If there is any point that is different from
the completed configuration, install the
child seat again from the beginning.
" The base is pressed against the
passenger seat.
# The support leg reaches the floor
and is locked correctly.
$ The seatbelt of the vehicle is not
loosened or twisted.
% If force is applied to the base, its
base does not move more than 2 cm
left, right, front, or back.
& The shoulder seatbelt is inserted all
the way to the belt stopper, and the
belt stopper is pushed in firmly.
Verification after placing your child
" The shoulder harness is adjusted to
the proper height.
# The harnesses are drawn until one
or two fingers of an adult can be put
between each belt of the shoulder
harness and the child's chest.
$ The harness adjuster is stored.
%
#
"
#
$
11 (EN)
A
"
&
$