Permanent Installation - Haier HDC1804TW Manual Del Usuario

English
H. When finished using the dishwasher, you need to close the water
supply to the tap.
NOTE: The water intake hose is now pressurized.
Press the red pressure release button on the Quick Release Faucet
Adapter, which will depressurize the water intake hose to easily remove
without squirting water all around.
The Quick Release Faucet Adapter should then be disconnected from the
faucet and stored for next use.
CAUTION: Do not let children disconnect the dishwasher. Close
supervision of children is always important around appliances.

PERMANENT INSTALLATION

The permanent installation will require connecting the dishwasher to a
permanent "HOT" water intake, usually tapped off from the sink's hot
water line. Also, the dishwasher's grey drain hose (included) needs to
be connected to a special sink drain pipe (not included) under the sink /
counter.
We recommend that you Contact a qualified person to carry out
the permanent installation. The dishwasher must be installed to meet
all local codes and ordinances for electrical and plumbing connections.
Parts Needed for Permanent Installation
Intake Hose: You will need to purchase a standard 3/4" intake
dishwasher hose and ttings to make a permanent installation.
Direct connect dishwasher tail pipe- You will need to purchase a
dishwasher tail pipe designed to connect to a kitchen sink drain, and a
matching hose clamp.
Hose connections for permanent installation
9