Troubleshooting; Error Codes - Haier HDC1804TW Manual Del Usuario

Lavavajillas para la encimera con capacidad para 4 cubiertos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
Dishwasher will
* Dishwasher does not have
not start
* Door is not closed.
* Dishwasher not level.
Dishes not clean
* Improper loading
* Spray arm not rotating freely
* Not enough detergent and/or
* Improperly prepared dishes.
* Water intake hose kinked/bent
*The filter not in place properly
Chipping or
* Improper loading of dishes.
breaking glassware
Water remains in
* A small amount of water (in
bottom
* Excessive amount of water;
Your Dishwasher Has An Error Code Indicator Function. If The Appliance
Falls Into A Certain Malfunction, The Corresponding Error Code Will Be Shown
Code
Rapid Flicker of Gentle Cycle
LED
Rapid Flicker of Normal Cycle
LED
Rapid Flicker of Heavy Cycle
LED
All the program lights flicker
Troubleshooting Guide
POSSIBLE CAUSE
electrical power
improper detergent being used.
due to improper installation.
sump area, under filter) is
normal.
cycle not completed.

Error Codes

By A Flickering Program LED Light.
Meaning
water intake problem
water drain problem
water heating
problem
abnormal water level
POSSIBLE SOLUTION
* Check electrical connection, fuse/circuit
breaker
* Close door securely.
* Level unit.
* Arrange dishes so spray action reaches
all surfaces.
* Do not overload dishwasher.
* Do not nest dishware.
* Check spray arm to make sure nothing
(i.e. cutlery) is obstructing spray arm
rotation.
* Check if filter screen has become
dislodged and obstructing spray arm
rotation.
* Use more dishwasher detergent
* Do not use detergent that is hard
or cracked.
* Use only a recommended dishwasher
detergent.
* Excess food soil and liquids should be
removed from dishes before loading.
* Eliminate kink or bend.
* Place the filter properly in its correct
position
* Do not overload dish rack. Load glasses
on the bottom of the rack only,
* This is necessary to keep the
pump primed and is drained
automatically at the beginning
* Allow dishwasher to complete full
cycle.
Possible Cause
faucet is not open
position of the drain pipe is to
high
malfunction of temperature
sensor or heating element
to much water intake
English
19

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Hdc1804tbHdc1804tss

Tabla de contenido