Sears Kenmore 139.34172410 Manual De Uso Y Cuidado página 20

3.Install t herearpanel a sshown below:
3.1Screw 4 AAscrews i ntothe backof eachsidepanelasshown belowLeave the screwheads protruding
approximately 1/8-inch above panel s urface.
3.2Setthe slots in the rearpaneloverthe protruding screws, andslidethe rearpaneldownrestonto the
bottom panel.
3.3Tighten t heAAscrews t o secure t herearpanel i nplace.
3.4Insert a ndtighten 1AAscrew inthemiddle of thebackpanel b aseasshown.
4. Install thecartbeamandtrianglestrengthening wedges a sshown below.
4.1Install t hecartbeam first.Makesure thedoormagnet i sontherightsideof thegrill.
4.1.1 Screw4 AA screws into the top front of eachsidepanelas shown below.Leave the screwheads
protruding a pproximately 1/8-inch above panel s urface.
4.1.2 Setthecartbeamslots overtheprotruding s crews. Tighten t hescrews t o secure t hecartbeam to theside
panels.
4.2 Install t hetriangle strengthening wedge using hardware a sshown below.
20