How To Use The Accessories; Basic Parameters; Product Specifications - YONO Cinta métrica láser Guía De Usuario

Step 4
Screen light display setting: In the previous mode, press and hold the
screen display setting mode. Then turn on/off the screen light display by short pressing the

How to Use the Accessories

Step 1
Insert the part into the belt.
Step 2
As shown, place card 1 to 2.
Step 3
Press and hold the slide button and lift up to take out the tape
measure.
button for 2 seconds to enter the
button.
screen light display is on
screen light display is off
12

Basic Parameters

Product Specifications

Size (about)
Weight (about)
Measurable units
Measurement time
Protection level
Tape measure range
Laser measurement: range
Laser measurement precision
Laser type
Laser auto off
Rangefinder auto power-off
Screen
Working temperature
Storage temperature
Battery life
Battery
Charging time
Benchmark setting
Measurement mode
Data clear
Battery level display
Signal strength display
Continuous measurement
3.3*1.7*3"/8.5*4.3*7.5cm
9.9oz/280g
m / in / ft.
0.3-4s
IP54
16,4ft/5m
131.2ft/40m
+/- 3mm
2 types
15 seconds
45 seconds
LCD display, white light
0~40°C
-20~60°C
3000 times for about 5 hours
3.7V lithium battery 180mAh
about 4 hours (5V/1A)
front/back benchmark
area, volume and Pythagorean
measurements
13