1byone O00QH-0507 Manual De Instrucciones página 3

3. Power Supply:
EN
Doorbell receiver : Please plug into a power outlet
DE
(AC110-120V).
PIR sensor: The PIR sensor is powered by 3x AAA
FR
batteries,please insert the battery using the
following procedure:
ES
・Remove the screw on the back of the PIR sensor
IT
with screwdriver. Next remove the battery
compartment cover.
・Insert 3 x AAA batteries into the battery
compartment, be sure using the correct polarity
to eliminate the danger of fire.
・Replace the battery compartment cover and
tighten the screw.
Safety Note:
Doorbell receiver:
・Please plug it into a safe power outlet.
・Do not expose the receiver to water spray or
water drops and do not place liquid-filled
objects such as vases or opened drink
containers on or near the receiver and the
outlet.
・Unplug the receiver immediately if you sense a
burning smell or smoke. Have qualified
- 03 -
personnel check the receivier before using it
again.
・Unplug the receiver from the outlet if the
doorbell system is not to be used for a long
time.
PIR sensor:
・The PIR sensor is powerd by 3x AAA battery.
when exhausted, replace it using the same type
and voltage battery.
・Always insert the battery using the correct
polarity to eliminate the danger of fire.
・Keep old and new batteries away from children.
・Old batteries should be properly disposed using
safe environmental practices.
・Remove the batteries from the PIR sensor if you
do not intend to use the Alarm kit for an
extended period of time.
4. Operation:
A. Selecting the notification mode:
The doorbell receiver can notify after the PIR
sensor has detected a car or someone passing
by playing a ringing sound, flashing an LED, or
ringing and flashing an LED at the same time.
- 04 -
EN
DE
FR
ES
IT