Descargar Imprimir esta página
HAMPTON BAY 91999 Guía De Uso Y Cuidado
HAMPTON BAY 91999 Guía De Uso Y Cuidado

HAMPTON BAY 91999 Guía De Uso Y Cuidado

Luz parpadeante con forma de llama

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

PACKAGE CONTENTS
A
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in
shaded areas as these areas will not allow the batteries to fully charge and will
reduce the nighttime operating hours for your light. Ensure that the installation
location is away from other nighttime light sources such as street or porch lamps.
These light sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Preparing for installation
FOR FIRST TIME USE: Twist and remove the housing (D) from the top cover (A).
Remove the pull tab from the battery compartment on the top cover (A).
Slide the switch to the ON or FLAME position depending on desired function.
A
D
Replace the top cover (A) on the housing (D) and twist to lock into place.
Use and Care Guide
Solar Flicker Flame Light
B
A
A
D
C
Part
A
1.2V AA 1000mAh rechargeable battery
B
C
D
E
F
2
Installing the solar path light
in the ground
NOTE: Do not use a hammer. If the ground is hard, use
water to soften or a trowel to loosen the soil.
Firmly slide the post (E) into the solar housing (D).
Attach the post (E) to the stake (F).
Push the assembly firmly into the ground.
1
Please contact
Item #xxxx xxx xxx
Model #91999
D
E
Description
Top cover
(pre-installed)
Battery cover
Housing
Post
Stake
D
E
F
HAMPTONBAY.COM
for further assistance.
1-855-HD-HAMPTON
F
Quantity
2
2
2
2
2
2

Publicidad

loading

Resumen de contenidos para HAMPTON BAY 91999

  • Página 1 Use and Care Guide Solar Flicker Flame Light Item #xxxx xxx xxx Model #91999 PACKAGE CONTENTS PLANNING FOR A SUCCESSFUL ASSEMBLY Part Description Quantity Read all instructions before assembly and installation. Top cover 1.2V AA 1000mAh rechargeable battery Inspect each part for defects that may have occurred during shipping.
  • Página 2 Maintenance Replacing the battery CAUTION: When replacing the battery, use one (1) 1.2V AA 1000mAh rechargeable battery. IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargeable 1.2V AA 1000mAh battery every 3 years or when performance diminishes.
  • Página 3 Guía de uso y cuidado Luz parpadeante con forma de llama Artículo #xxxx xxx xxx Modelo #91999 CONTENIDO DEL PAQUETE PLANIFICACIÓN DEL ENSAMBLAJE EXITOSO Pieza o Descripción Cantidad Leer todas las instrucciones antes de ensamblar e instalar. parte Inspeccionar cada una de las partes o piezas para ver si fueron afectadas durante Cubierta superior el envío.
  • Página 4 Mantenimiento Cómo reemplazar la batería CUIDADO: Al reemplazar la batería, usar una (1) recargable AA de 1.2 V y 1000 mAh. IMPORTANTE: Desecha las baterías de acuerdo con las regulaciones locales, estatales y federales. NOTA: Para mejor rendimiento, reponer con una batería recargable AA de 1.2 V y 1000 mAh cada 3 años o cuando disminuya el rendimiento.