•
Use appliance on a table or flat surface.
•
Keep the product away from curtains, wall coverings, clothing,
dishtowels, or other flammable materials.
•
Do not plug or unplug the product from the electrical outlet with a wet
hand.
•
This product is intended solely for non-commercial, non-industrial,
household use in cooking of food for human consumption; do not use the
product outdoors or for any other purpose.
•
Do not operate the product empty.
•
Do not let cord hang over edge of table or counter where it may be
tripped over or pulled. Do not allow cord to touch hot surfaces.
•
Do not operate the product if it has a damaged or cut Power Cord or
plug, if wires are exposed, if it malfunctions, if it is dropped or damaged,
or if the Motor Housing is dropped in or exposed to water.
•
This product has no user-serviceable parts.
•
Do not attempt to examine or repair this product yourself. Only qualified
service personnel should perform any servicing; take the product to the
appliance repair shop of your choice for inspection and repair.
•
Do not put any stress on the power cord where it connects to the
product, as the power cord could fray and break.
SPECIAL INSTRUCTIONS:
•
Keep hands and utensils out of container while blending to reduce the
risk of severe injury to the blender or a personal injury. A scraper may
be used but only when blender is not running.
•
Blades are very sharp. Handle Carefully.
•
To reduce the risk of injury, always completely assemble the blade and
cup before placing on the Power Base.
•
Never Microwave with the blade or solid lid still attached. Remove the
blade or solid lid and twist on a Shaker/Steamer top.
•
Do not defrost frozen beverages in Blender Cups. Even if the container is
open, pressure can build up. This can cause the container to burst,
possibly resulting in injury.
•
A short power supply cord is provided to reduce the risk of becoming
entangled in or tripping over a longer cord. An extension cord is not
recommended for use with this product, but if one must be used:
-
The marked electrical rating must be at least as great as that of the
product.
3