mixars Primo Manual Del Usuario página 6

41. Key Lock button
Press to turn on/off key lock of the current track.
If Serato DJ's Pitch 'n Time is enabled, hold « Shift»
and press to turn on/off key sync.
42. Autoloop button
Press to turn on/off autoloop.
Hold « Shift» and press to active loop.
43. Loop halve/ double buttons
Press to halve of double the loop size.
Hold « Shift» and press to jump loop beat.
44. PLF button
Press to turn on/off PFL of the corresponding
channel.
45. Channel faders
Adjust the volume level of the corresponding
channel.
46. Master Level Meter
Display the Master Level Signal.
47. Crossfader
Crossfade between the Left and Right channels of
audio signal.
48. Shift button
Hold for enabling the shifted functions of some
controls
49. Sound Texture FX selection switch
Switch between Filter, Noise, Crush and Echo effect
and control the FX parameter by « Channel Sound
Texture FX knob»
50. Channel Sound Texture FX knob
Adjust the parameter/ level of the selected sound
texture FX.
51. Parameters buttons
Press to adjust the parameter 1 of the performance
pads.
Hold « Shift» and press to adjust the parameter 2 of
the performance pads.
52. Sampler Button
Switch the performance pads to Sampler Mode.
If Serato DJ's Pitch 'n Time is enabled, hold « Shift»
and press to switch to Pitch Play mode .
53. Slicer Button
Switch the performance pads to Slicer Mode. Hold
« Shift» and press to switch to Slicer Loop Mode.
54. Roll Button
Switch the performance pads to Roll Mode. Hold
« Shift» and press to switch to Manual Loop Mode.
55. Cues Button
Switch the performance pads to Cues Mode. Hold
« Shift» and press to switch to Cue Loop Mode.
56. Performance Pads
Use to trigger cue points, samples, roll, slicer, cue
loop, manual loop, slicer loop or pitch play in
Serato DJ.
57. Play Button
Press to play or pause the track.
58. Cue Button
Press to cue.
59. Sync Button
Press to turn on sync.
Hold « Shift» and press to turn off sync.
60. Touch Needle search
Touch on the stripe to quickly search to the desired
location of the current track.
61. Censor Button
Press to turn on/off Censor mode.
Hold « Shift» and press to turn on/off Reverse.
62. Touch sensitive performance platter
Touch on the touch sensitive area and turn the
platter for scratching performance.
Turn the platter on the outer area for temporary
pitch bend.
The middle illuminating logo and blue LED ring
show the status of the scratch performance.
63. Vinyl Button
Press to turn on/off Vinyl mode.
Hold « Shift» and press to turn on/off Quantize.
5