Safety Notes; Functional Description; Technical Data - CST/BERGER LD500 Manual Del Usuario

Safety Notes

Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of the
measuring tool is maintained.
Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which may
ignite the dust or fumes.
Keep the measuring tool away
from cardiac pacemakers. The
magnets 6 generate a field that can
impair the function of cardiac pace-
makers.
Keep the measuring tool away from mag-
netic data medium and magnetically-sensi-
tive equipment. The effect of the magnets 6 can
lead to irreversible data loss.

Functional Description

Intended Use
The measuring tool is intended for quick finding of
rotating laser beams.
Product Features
The numbering of the product features shown refers
to the illustration of the measuring tool on the graphic
page.
1 Direction LED "move downward"
2 Centre-indication LED
3 Direction LED "move upward"
4 Reception area for the laser beam (240°)
5 Opening for safety pin
6 Magnets (for fastening to retaining clamp or con-
struction machine)
7 Button for adjustment of the measuring accuracy
8 On/Off button
9 Button for setting of audio signal and display illu-
mination
10 Battery lid
11 Serial number
12 Display
8 | English
13 Direction indicator "move downward"
14 Centre mark
15 Direction indicator "move upward"
16 Indicator for measuring accuracy
17 Battery indicator
18 Display illumination indicator
19 Audio signal indicator
20 Retaining clamp
21 Metal surfaces (for fastening to magnets 6 of
laser receiver)
22 Centre indicator
23 Fastening screw of holder
24 Safety pin *
25 Securing strap *
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Laser Receiver
Article number
1)
Working range
Receivable wavelength
Receiving angle
Reception area
2)
Measuring accuracy
– "Coarse adjustment"
– "Fine adjustment"
– Measuring-rod adjust-
ment
Dimensions (W x H x D)
Batteries
Degree of protection
Operating temperature
Weight according to
EPTA-Procedure 01/2003
1) Depends on the working range of the rotational laser being
used
2) The accuracy is based on standard conditions with the
most common lasers. Slight varieties are possible, depending
on manufacturer, beam quality and operating conditions.
Noise Information
The A-weighted sound pressure level of the audio sig-
nal can exceed 85 dB(A).
Do not hold the measuring tool close to your
ear! Wear hearing protection!
LD500
F 034 K69 9N0
m 370
nm 635 – 650
° 240
cm 12
± 25
mm
± 10
mm
± 5
mm
cm 11 x 17 x 4
2 x AA 1.5 V
IP 57 (protection
against dust and
temporary
immersion of
water)
– 20...+50 °C
kg 0.8
2 610 A15 116 • 23.6.09