Intended Use - KaWe med.lux Instrucciones De Empleo

User's Manual:
med.lux / Cliplight LED / KaWe DIALIGHT XL / Diagnostic light, white
Dear buyer, we are grateful to you for choosing KaWe
products Our products are of high quality and
long-lasting. This KaWe device complies with the
provisions of Regulation EU 2017/745 (European
Regulation on Medical Devices), whereby it is classified
as a medical product of class 1.
Please carefully consider this instruction and
read all the provisions prior to use. Follow the
maintenance recommendations. Prior to use, please
carefully consider the maintenance procedure.
Keep the User's manual, so you can refer to it again in the
future, and pass it on to the next user of the device.
Application:
Only qualified medical professionals can use the
diagnostic light.
Group of patients with indications for use: All

Intended use:

A diagnostic tool for illuminating the studied areas, for
example, the oral cavity and the skin surface.
The Cliplight LED and med.lux models have been tested
according to the EN 62471 standard, and are also suitable
for eye examination.
Operation:
med.lux: Before the first use, remove the plastic battery
insulator between the battery and the contact surface.
Switch the light on and off by pressing the push-button
switch at the end of the clip.
Unscrew the metal lamp bracket to replace
the batteries.
Type: AAA
Cliplight LED: Switch on by pressing the clamp until
contact occurs with the metal ring on the pin. Unscrew
the metal lamp bracket to replace the batteries.
Type: AAA
Diagnostic Lamp KaWe DIALIGHT XL: Switch on and
off by moving the slider switch. Unscrew the upper part
from the handle to replace the lamp or batteries.
Type: AA
Diagnostic light, white: Switch the light on and off by
pressing the black push-button switch at the end of the
clip. Unscrew the upper part of the clamp to replace the
lamp or batteries.
Type: AAA
5