ION FCS Board Mount Guía Rápida De Usuario página 4

(The diagram is for illustration purpose, outer appearance of the screw is subject to the model
being connected)
4. Attach the Fix Screw with Camera onto the top of the FCS plug, insert the connection screw and
retighten the nut.
(For details about how to attach the Fix Screw to your Camera, refer to section 3.2.)
(The diagram is for illustration purpose, outer appearance of the camera is subject to the model being
connected)
Note: Please make sure to fit the gears of the Fix Screw to the FCS plug correctly
5. Peel off the protective membrane of the double faced adhesive-secure piece and adhere the
secure piece to a suitable location on the board.
Note: Before mounting, make sure the surface of the board on which the double faced adhesive will be
adhered is clean so that the secure piece can be affixed securely to the board.
EN-3