FIGURE 2
A
4
2
Step 2:
Place the decorative plastic cover (#4) on the chair's base
assembly (#2) as above picture A shows. See Figure 2.
FULL ASSEMBLY
Warranty
• This product is covered by Courtyard Creations Inc.'s 3 year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
V-4
4
A
4
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
STOP
DO NOT RETURN TO STORE!
FIGURE 3
2
#6 BOLT M6*35
Step 3:
Insert the seat post (#3) into the hole located in the center of
the base assembly (#2). Fasten them together by using bolt
(#6) and washer (#9). Make sure that all of the bolts have
been tightened completely. See Figure 3.
Note:
For ease with installation, we recommend that the seat post
(#3) beslightly oiled or waxed before fastening to the base
assembly (#2).
Step 4:
See Full Assembly.
Caution:
This is a bar chair with swivel ability. Therefore, keep young
children off it without adult supervision. Watch your step when
getting on and off this chair. When sitting on this chair, do not
lean forwards or backwards in order to avoid tipping and
falling off.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis
to ensure the proper performance and safety of your swivel
chair.
• In order to prolong the life and beauty of your swivel chair,
we recommend that it be stored in a dry and protected area
during off season periods.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
3
2
9
6
35