HAMPTON BAY 1000-036-995 Manual De Instrucciones página 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2 Socket Ring (#6)
2 Bushing (#14)
ASSEMBLY INSTRUCTIONS:
1.
Shut off power at the fuse box or circuit breaker box, if necessary, remove the old
fixture, including the mounting hardware.
2.
Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3.
Attached the metal rings (#3) to the frame on the back plate (#1), then secure it with
short screws (#2) and long screws (#15) as shown in assembly figure.
4.
Using the bushings (#14) plug up the visible hole of the frame on the back plate (#1).
5.
Place the glass shades (#4) and socket covers (#5) over the sockets and secure with
socket rings (#6).
2 Socket Cover (#5)
2 Long Screw (#15)
2 Glass Shade (#4)
2 Short Screw (#2)
2 Metal Ring (#3)
Page 4