Intended Use; Identification Plate - MTD K 17 Manual Del Usuario

Safety information
General safety information
¾ Before initial use, perform a visual
inspection of the device to check
for damage. Prior to use any damage
must be repaired by a qualified expert
or workshop.
¾ Do not charge any damaged,
defective or deformed power packs.
The device is intended for charging power packs of type 40V LI-ION; only these are
authorised by the manufacturer. Any other use is classed as incorrect use. The user is
liable for any damage arising from incorrect use.
Position
The identification plate is located at the charger casing.
Note
The identification is considered as a document. It must never be altered or
obliterated.
Layout
Safety information
¾ Do not charge any third party
power packs.
¾ Never try to charge non-
rechargeable batteries.
¾ Do not cover the ventilation slits of
the charger. Otherwise the charger
may overheat and no longer function
correctly.
¾ Repairs must only be performed by
a qualified expert or workshop

Intended use

Identification plate

1 CE label
2 Disposal note
3 Protection class
4 Rated output voltage /
current type, current strength
5 Type of device (charger)
6 Mains frequency
7 Rated output current
8 Fuse
9 Year of manufacture
10 Rated output voltage / current type
11 For use inside buildings only
12 Read instruction manual
13 Serial number
14 Model number
15 Model name
16 Manufacturer
EN
11