Servicing / Care; Ce Declaration Of Conformity; Warranty; Disposal - MTD K 17 Manual Del Usuario

Servicing / Care

Fault
Does not charge
(steady red light).
No charging takes
place.
Fault
(red flashing light).
Fault (red-green
flashing light).
Servicing / Care
Risk of injuries or material
damage.
¾ Before any work on the
device, switch off and
remove the power pack.
¾ Pull out the mains plug.
¾ Do not open the device.
¾ Servicing and repair must
only be performed by a
specialist.
Keep the charger clean and dry.
Î
Clean the contacts and ventilation slits
Î
of the charger pack with a soft dry cloth
or if it is heavily soiled use a brush.

CE Declaration of Conformity

Further details about the device
are contained on the separately
enclosed CE Declaration of
Conformity. This forms a part of
this instruction manual.
Possible cause
The contacts are dirty.
The power pack is not correctly
inserted.
The fuse at the mains connection
has blown/is defective.
The power pack temperature is
outside the range 5 °C - 45 °C.
The power pack is defective.
WARNING!
Remedy
Clean the contacts.
Insert the power pack correctly
in the charger.
Contact an electrician to arrange
its repair.
Allow the power pack to cool or
heat up.
Replace the power pack.

Warranty

The warranty conditions of our local
company or importer apply in all coun-
tries. Under the terms of the warranty we
will repair faults on your device free of
charge, insofar as material or manufac-
turing defects are the cause. To make a
claim under warranty please contact your
seller or your nearest branch.

Disposal

Electrical tools, accessories and packag-
ing must be routed into an environmen-
tally sound recycling chain.
Do not throw old electrical and
electronic devices away with
your domestic waste. Take it to
a suitable disposal facility.
EN
13