Maintenance; Replacing The Battery; Cleaning; Calibration - PCE PAC 20 Manual De Instrucciones

5/ MAINTENANCE

For maintenance, use only specified spare parts. The
manufacturer will not be held responsible for any
accident occurring following a repair done other than by its
After Sales Service or approved repairers.

5.1/ REPLACING THE BATTERY

- Completely disconnect the clamp from the circuit to be measured
and the measurement instrument it is connected to.
- Unscrew the tool release screw holding the cover of the battery
compartment.
- Replace the 9 V battery (type 6LF22, 6LR61 or NEDA 1604).
- Replace the cover of the battery compartment.

5.2/ CLEANING

Keep the jaw faces and mechanism perfectly clean.
The body of the clamp should be cleaned with a cloth moistened
with soapy water.
Rinse with a cloth moistened with clean water.
Never expose the clamp to running water.

5.3/ CALIBRATION

Like all measuring or testing devices, the instrument
must be checked regularly.
This instrument should be checked at least once a year. For
checking and calibration, contact one of our accredited metrology
laboratories (information and contact details available on
request), at our Chauvin Arnoux subsidiary or the branch in your
country.

5.4/ REPAIRS

For all repairs before or after expiry of warranty, please return the
device to your distributor.
15