Safety Equipment; Technical Data - Deltafox DG-PLM 5125 SP Traducción Del Manual De Instrucciones Original

GB
35 Hose connection
36 Lock nut Bowden cable
37 Adjusting nut Bowden cable

Safety equipment

2 Safety catch
The equipment stops when the
safety catch is released.
22 Impact protection
protect the operator from parts
that are flung out and from ac-
cidentally touching the blades
when mowing with no grass col-
lection box.
16 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust
17+28 Lateral ejection with impact
protection
prevents the lateral ejection of
lawn cuttings and solid parts
and strings up the lawn cuttings
from the side.

Technical data

Petrol lawn mower ...... DG-PLM 5125 SP
Performance ...................................2,5 kW
Engine .............................RATO RV 170-S
Engine size ............................... 170.1 cm
Blade rotation speed n
Blade torq ue ......................... max. 45 Nm
Wheel drive.......................... aprox. 3 km/h
Petrol tank volume .............................. 0.8 l
Octane rating ....................................95-98
Engine oil tank volume ................... 500 ml
Motoroil ..................HD SAE 30 or 10W-30
Spark plug ........................... Torch F5RTC
Cutting width .................................510 mm
Cutting height ..............6-steps, 25-75 mm
Grass collection box volume................ 70 l
104
............ 2900 min
0
Weight ...........................................29,5 kg
Sound pressure level
(L ) ..................... 85.5 dB (A), K
pA
Sound power level (L
measured ...... 96.68 dB (A); K
guaranteed ...............................98 dB(A)
Vibration (a ) at the handle
h
left ....................... 3.734 m/s
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
3
be considered (for example, times
-1
when the electric tool is switched
off and times when it is switched
on but running without any load).
=3 dB
pA
)
WA
=1.14 dB
WA
; K=1.5 m/s
2 2