Aqara M1S Guía Rápida página 6

2. Add Hub M1S
1
Plug the hub into the socket and wait until the yellow light blinks
quickly. Make sure your mobile Phone is connected with 2.4 GHz
Wi-Fi network.
* If you are using a dual band router, please disable the 5 GHz Wi-Fi network.
* Keep your phone close to the hub and make sure both of them are
connected with the same Wi-Fi network.
2
Please open the Aqara Home app, click "+" in the upper right
corner, select "Hub M1S" and follow the instructions to complete
adding the hub.
* iOS user: Follow the instructions to scan the product box or manually enter
the HomeKit code on the hub, and complete the setup. Once it is added
successfully, you can check the hub in the Apple Home app. Please keep the
HomeKit code in a safe place in case you need to add the hub again.
3 If you failed to add the hub, please press the button on the hub for
more than 10 seconds until the yellow light flashes quickly, and
then add it again.
03