Measure Power Consumption; Maximum Power Consumption - brennenstuhl PM240S Manual De Instrucciones

Operation
q
i
i
q
i
i
48 GB
Energiekostenmessgeraet_Content_PM240S_1.indd 48

Measure power consumption

Press the UP button 5 until the Watt symbol 8 appears
in the top third of the LCD display 2 .
The LCD display 2 now indicates the current power
consumption in W (Watt) required for the load.
note: the power consumption is calculated according
to the following formula: power = voltage x current x
power factor.

Maximum power consumption

Press the UP button 5 until the Max symbol 18 and the
Watt symbol 8 appear in the top third of the LCD
display 2 .
The LCD 2 now indicates the maximum power con-
sumption in W (Watt) measured by the wattmeter so far.
note: you can also call up the maximum power con-
sumption reading when the wattmeter has been removed
from the outlet or when the electrical appliance you are
testing is no longer connected to the wattmeter.
note: the maximum power consumption is saved until
a higher value is measured. The old value is then over-
written by the new measurement.
09.03.09 12:53