Gateway Setup - Tena SmartCare TM Manual De Instrucciones

NOTE
The gateway should be within 33 ft (10 m) from
the Change Indicator and plugged into a power
socket to use the TENA SmartCare Change
Indicator system.
Placement
33 ft (10 m)
2
Click!
4
NOTE
• If an internet connection cannot be established,
please try to change the location of the TENA
SmartCare gateway.
• It is advised for the gateway to be placed so
that is has a clear line of sight towards the
Change Indicator.

GATEWAY SETUP

1
Screws or
adhesive strip
3
You can also place the gateway
Blinking light
on a flat surface = connecting
EN
Light
Steady light No light
= connected = OK
3