OperatiOn inStrUctiOnS
Thank you for choosing Unimeter Digital grain moisture meter!
Read the whole manual before you use the meter!
1. Box content
• Unimeter Digital grain moisture meter
• Carrying case
• Cleaning brush
• Operation instructions
• 9 V battery (installed)
2. Preparation
Insert the battery – Be careful to make sure its in the correct way ! Do not leave the battery in the meter
outside of the season.
Use the < > buttons to navigate through the options
Use the < > button to find the battery power indicator
The different changeable options are;
Contrast
= Display Contrast
Language
= Change the Language
The List of Grains/Seeds
= See the chart later in the instructions
To change;
Choose option using < >
Press Test
Change using < >
To save change press Test
Just for information;
Version
= Software Version
Temperature
= Sensor temperature in the meter
Battery Voltage
= It must be above 7,2Volts otherwise it will shut down.
Before testing any grains or seeds the Unimeter should be checked with your local grain dealer. We at Unimeter
take every care to ensure your meter has the latest and most popular grain varieties included, BUT local varieties
and growing conditions can affect the measuring.
3. Adjusting the measurement for a grain/seed
Switch On
Choose grain/seed type
Press < > At the same time !
Offset is displayed
Use < > to adjust either + or – values
Press Test to save
4. Samples
• Always take several samples and use their average as the result
• Remove waste and green or abnormal grains.
• Direct from the dryer;
• Give the grains time to cool a little before measuring.
• Take samples from different places due to damp spots !
.
.
www
kramp
com
UK
1