En - User Guide - Barbecook JUNKO 223.9670.000 Guia Del Usuario

EN - USER GUIDE

1 REGISTER YOUR APPLIANCE
Thank you for purchasing a Barbecook appliance! We are sure it
will bring you lots of happy barbecue moments.
To optimize your experience, register your appliance at
www.barbecook.com. It takes only a few minutes and yields
some major benefits:
You get access to our personalized after sales service. This
•
allows you, for example, to quickly find spare parts for your
appliance or to profit from an optimal warranty service.
We can inform you about interesting product updates and
•
direct you to the product information and specifications that
are relevant for your appliance.
For more information about registering your appliance,
2
refer to www.barbecook.com.
Barbecook respects your privacy. Your data will not be
0
sold, distributed or shared with third parties.
2 ABOUT THIS MANUAL
This manual is composed of two parts:
The first part is the part that you are reading now. It includes
•
instructions for the assembly, use and maintenance of your
appliance.
The second part starts on page 97. It includes all kinds of
•
illustrations (exploded views, assembly drawings...) of the
appliances that are described in this manual.
3 IMPORTANT SAFETY
INSTRUCTIONS
3.1 Read and follow the instructions
Read the instructions before using the appliance. Always follow
the instructions carefully. Assembling or using the appliance
differently can cause fires and material damage.
Damages caused by not following the instructions
1
(improper assembly, misuse, inadequate maintenance...)
are not covered by the warranty.
3.2 Use your common sense
Use your common sense when working with the appliance:
Do not leave the appliance unattended when in use.
•
Warning! The appliance will become very hot, do not move it
•
during operation.
Use appropriate protection when handling hot parts.
•
Keep flammable materials, flammable liquids and dissoluble
•
objects away from an appliance in use.
Warning! Keep children and pets away from an appliance in
•
use.
Keep a bucket of water or sand at hand when using the
•
appliance, especially on very hot days and in dry areas.
Warning! Do not use indoors.
•
3.3 Select an appropriate location
Use the appliance outdoors only. Using it indoors, even in a
garage or shed, can cause carbon monoxide poisoning.
When selecting an outdoor location, always:
Make sure the appliance is not under an overhanging
•
structure (a porch, a shelter...) or under foliage.
Put the appliance on a firm and stable surface. Never put it
•
on a moving vehicle (a boat, a trailer...).
4 ASSEMBLING THE APPLIANCE
4.1 Safety instructions
Do not modify the appliance when assembling it. It is very
•
dangerous and not allowed to alter parts of the appliance.
Always follow the assembly instructions carefully.
•
The user is responsible for the correct assembly of the
•
appliance. Damages caused by improper assembly are not
covered by the warranty.
4.2 To assemble the appliance
You need a cross-slotted screwdriver.
Put the appliance on a flat and clean surface.
1
Assemble the appliance as shown on the assembly
2
drawings.
You find the assembly drawings in the second part of this
3
manual, after the exploded view of your appliance.
5 GETTING THE APPLIANCE READY
FOR USE
You need dry newspaper, wood (twigs, branches, logs),
firelighters (complying with EN 1860-3) and a long match.
5.1 Step 1: Checking and installing the
tripod
Take the tripod and check if the screws at the top are still
1
firmly fixed. You have to do this each time you use the tripod.
If the screws are loose, proceed as follows to tighten them:
2
Remove the chain and the cover from the top of the
a
tripod.
Tighten the screws with a cross-slotted screwdriver.
b
Put the cover and the chains back on the tripod.
c
Place the tripod in an appropriate location and push the legs
3
firmly into the ground. This prevents the legs from moving
when you manoeuvre the grill with the pulley.
If you cannot push the legs into the ground, you cannot
1
hang the grill from the pulley. You then have to hang it
from the legs of the tripod. See "5.3 Step 3: Installing the
grill".
5.2 Step 2: Installing the fire pit
You have to hang the fire pit from the legs of the tripod. Proceed
as follows:
Take three mounting chains and hook one end of each chain
1
in one of the mounting holes in the fire pit.
Put the free ends of the chains over the hooks on the legs of
2
the tripod.
Make sure the fire pit hangs straight. Reposition the legs of
3
the tripod if necessary.
Check if tripod is still stable. Push the legs as firmly into the
4
ground as possible.
www.barbecook.com 5