Vortex VX 4400 Manual Del Usuario página 2

The patented VX4400 mechanical electro magnet locking device is
designed for securing sliding door mechanisms (automatic or mechanical).
The holding force depends on its fitting but average 6800 N (680kg). It is a
simple installation and it provides an additional and reliable locking
solution superior to traditional electromechanical locks. Also, the VX4400
could be supplied with mounting accessories required by door
manufacturers.
Wiring and Power input requirements:
VX4400 Lock Wiring (to PCB):
MEM Power Input:
EW Sensor Output:
PCB Connection:
Power Input:
DSS Sensor Input:
MEM Lock Power Output:
Exit Input:
Auto Door Control Output:
Alarm Relay Timer Input:
Alarm Relay Output:
VX 4400
Vortex for sliding doors
Introduction
12VDC, RED (+); BLACK (-)
WHITE (NC), BROWN (C), GRAY (NO),
30 VDC, 0.2 A Max.
12 VDC, 1 A Max.
Normally Open.
Connect to MEM Power Input.
Connect L + to RED (+);
Connect L - to BLACK (-)
Normally Open. (Not supplied)
Normally Open. Relay Output.
Connect to Auto Door Control
Panel Input.
Normally Open.
To active the C/NC/NO Alarm Relay Output.
Connect to EW Sensor Output BROWN
and GRAY to the VX4400.
C/NC/NO Relay Output.
0 ~ 30 Seconds Delay Timer.
2